Worcester MT10RF User Manual download pdf (Page 9)

TRANSMITTER

CLEARANCES & FIXING

FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH

MT10RF/MECHANICAL RF THERMOSTAT

8-716-106-196 issue c (08.04) UK

6mm

INSTALLATION &

COMMISSIONING

TRANSMITTER CLEARANCES:

See diagram opposite for minimum area

(shown in mm) required for operation.

TRANSMITTER

CLEARANCES & FIXING

TRANSMITTER FIXING:

1 Hold baseplate (B) level to mark

securing points (C) and remove

baseplate (B)

2 Drill holes, where marked, 30mm

deep using a 6mm diameter drill bit

3 Push one wall plug (D) into each hole

4 Reposition baseplate (B), check level

and secure with screws (E)

5 Align outer edge and internal lugs (F)

of transmitter to baseplate (B) and

push fit to secure

CAUTION: Ensure there are no

pipes, electric cables or other

hazards before drilling.

250

45 160

30mm

SAFETY: All relevant safety

precautions must be undertaken.

Protective clothing, footwear,

gloves and safety goggles must be

worn as appropriate.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Worcester MT10RF User Manual Page 9